Material Series · Optical-Effect System
Photonic Series Forged Carbon Fiber
Carbonaurum combines photonic-crystal visual behavior with forged carbon fiber to create angle-responsive optical effects for premium B2B product development.
Series Introduction
An optical material system that changes as the product moves.
Photonic Series is Carbonaurum’s advanced optical-effect forged carbon fiber system. Its visual response is created by combining a photonic-crystal direction with the irregular depth and distribution of forged carbon.
The result is more dynamic than conventional colored forged carbon: different viewing angles and lighting conditions can reveal changing spectral tones across the same material surface.
This page describes the design and sourcing value of the system without disclosing confidential formulas, processing parameters or patent-sensitive manufacturing details.
Visual Characteristics
Light, angle and carbon distribution create the experience.
Representative samples should be reviewed under the lighting and surface finish planned for the final product. Appearance is intentionally dynamic rather than a single fixed color.
Angle-Responsive Color
Reflections can shift as the viewing angle changes, giving a finished part a more active visual identity.
Spectral Layering
Blue, violet, crimson, emerald and gold directions may appear across representative material samples.
Forged-Carbon Depth
Irregular carbon distribution adds depth and variation so the optical response does not read like a printed graphic.
Series & Collections
Photonic Series is the technology system. Spectrum is its visual Collection.
This distinction preserves Carbonaurum’s existing Material Collections while giving buyers a clear path to the underlying material technology and supply route.
Spectrum Collection
Spectrum expresses the vivid, continuously changing visual language associated with Photonic Series. It remains part of the existing Collections library rather than becoming a fifth Material Series.
Explore Material Collections →Available Product Shapes
Choose an existing mold and start from one piece.
Carbonaurum already has production molds for selected sheet and tube specifications. Buyers can order one piece to machine, test and present internally before deciding on a larger production order.
Sheets & Plates
Flat photonic forged-carbon material for sampling, CNC-machined parts, inlays, panels and visible product details.
Existing mold · From 1 piece →
Tubes
Existing tube mold specifications can be selected for prototype parts, machined rings, sleeves and cylindrical design evaluation.
Existing mold · From 1 piece →Simple Trial Pricing
Three clear ways to start.
Choose a low-cost tube or bar trial, a thin development sheet, or a larger machining sheet. Every option uses an existing Carbonaurum mold and can be ordered as one piece.
For an existing sheet length-and-width mold, specify the required thickness in 0.5 mm increments—for example 1.0, 1.5, 2.0, 2.5 mm and upward to 30.0 mm. The prices below are transparent reference examples, not the limit of available thicknesses.
Photonic Tube / Bar
240 × 30 mm · Existing mold
Thinnest Sheet Option
220 × 450 × 2.5 mm · Existing mold
Photonic Sheet
400 × 500 × 2.5 mm · Existing mold
Need bulk production pricing?
The one-, three- and five-piece prices are designed for material trials and small development orders. Larger confirmed quantities can receive a lower bulk production unit price based on the exact specification and order volume.
14 current one-piece price references
Additional 0.5 mm thickness increments are quoted to specificationFactory prices in USD. International shipping is not included and will be quoted separately for the delivery country. Three-piece and five-piece unit pricing for every listed sheet size is available on request.
Choose one of the three starting options and send your delivery country. We will confirm the visual effect, production timing and international freight before payment.
Choose My Trial OptionApplication Directions
For products designed to react visually to movement.
These are application directions, not universal suitability claims. Material samples and part requirements must be reviewed before production.
Designer Jewelry
Inlays and visible components where changing reflections support a recognizable design identity.
Luxury Accessories
Decorative inserts, hardware and signature surfaces intended to be seen from multiple angles.
Consumer Electronics
Premium panels and details where optical movement can distinguish a product family.
Signature Collections
Technology-led material development for limited, flagship or identity-focused product programs.
Real Material Gallery
One material—multiple optical readings.
Real Carbonaurum Spectrum and photonic material photography. Lighting, viewing angle, cutting direction and surface finish can change the colors visible in each image.
One-Piece Material Trial
See it, machine it and test it before scaling.
Existing-mold sheet and tube specifications can be ordered from one piece, helping designers, independent brands and development teams evaluate a new material with minimal initial commitment.
Photonic appearance cannot be judged from one screen image alone. A physical trial lets the buyer evaluate light response, machining, exposed surface area and final polishing in the real product context.
Special dimensions, new molds, custom effects and project-specific development are reviewed separately and may require a different minimum.
Photonic Series FAQ
Questions before optical-material sampling.
The purpose of sampling is to evaluate the material as it will appear in the finished product—not only in a catalog image.
What makes Photonic Series different from conventional colored forged carbon?
Photonic Series is designed around angle- and light-responsive optical behavior. Conventional Color Series focuses on established visible color directions, while Photonic material can reveal changing spectral tones as the product moves.
What does “Patent Pending” mean on this page?
It means a patent application is pending for the relevant Carbonaurum development. It does not mean a patent has already been granted, and the material is not described here as patented.
Can we really order only one piece?
Yes. Photonic sheets and tubes made with an existing Carbonaurum mold can be purchased from one piece, subject to the selected specification and current production availability. New sizes, new molds and special development projects are quoted separately.
How quickly can an existing-mold order ship?
Most existing-mold sheet and tube orders can be ready to ship in approximately 1–2 weeks after the specification and order are confirmed. The exact dispatch date is provided before payment.
Do you offer a lower price for bulk production?
Yes. The published one-, three- and five-piece prices support trials and small development orders. For larger confirmed quantities, Carbonaurum provides a lower bulk production unit price based on the selected specification and order volume.
Which Photonic product formats are currently available?
Sheets and tubes using existing Carbonaurum mold specifications are the available starting formats shown on this page. Blocks, rods, new dimensions and custom components require a feasibility review.
Will every sheet and finished part look identical?
No. Forged-carbon distribution creates natural variation, and the optical response also changes with angle, lighting, cutting direction and surface finish. Representative samples should be approved before production planning.
How do we request Photonic samples?
Send your application, approximate part dimensions, exposed viewing area, desired finish and estimated demand through the Contact page. Carbonaurum will review the most suitable sheet sample and next development step.
Start With One Piece
A new material should be easier to try.
Choose an existing-mold sheet or tube specification, order one piece, and evaluate the Photonic effect in your real product. Share the target dimensions and application—we will help identify the fastest starting option.